Remove Corners and Ribbons Before Sending Prints to THe IPC
Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2007
    Location
    New Orleans, LA.
    Posts
    3,550

    Default Remove Corners and Ribbons Before Sending Prints to THe IPC

    I know this reminder may be a bit late - but for those who have not yet shipped their prints in to the IPC...

    Please remove any previous competition exhibition corners, ribbons and awards from your prints before sending them to the IPC. These items will have to be removed from the prints before being sent to the judging, so removing them at your studio will prevent them from being lost.

    I know this sounds like a reminder of something that should be a "no-brainer", but we did have quite a number of prints submitted last year that still had the exhibition corners and ribbons on them from prior state and/or district competitions. We had to remove them and tape them to the back of the prints before they could be judged. So please remove them before sending them in, because the PEC cannot be held responsible if they are lost.

    Thanks.
    Last edited by Rick_Massarini; 07-09-2012 at 06:45 AM.
    The best way to gain for yourself is to give OF yourself.
    - - - So get out there and volunteer for something ...


    Rick Massarini, M. Photog., Cr., CPP., F-PPLA
    PPLA Past President; 97th Recipient PPA Directors Award
    ASP SouthWest District Rep. & ASP Convention Booth Chairman


  2. #2
    Join Date
    Jun 2010
    Location
    Damascus, MD
    Posts
    15

    Default Re: Remove Corners and Ribbons Before Sending Prints to THe IPC

    There you go...common sense out the window again!

  3. #3

    Default Re: Remove Corners and Ribbons Before Sending Prints to THe IPC

    This was my first year doing prints to SWPPA and when I got my prints back I had no idea I had to remove the corners. Good thing I have a friend who is well experienced warned me long before I shipped my case. I would have sent them as they were.

  4. #4
    Join Date
    Aug 2005
    Location
    Fayetteville, Ga.
    Posts
    1,809

    Default Re: Remove Corners and Ribbons Before Sending Prints to THe IPC

    I didn't even unwrap it so my corners are still there. Hopefully I'll get them back, but if not, I'm giving the print to the subject anyway.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Live Chat is open