PDA

View Full Version : SEPPA Sizes



Erin_L._Clark
03-08-2011, 04:05 AM
Can someone tell me what sizes are okay for SEPPA? Minimum and maximum?

Rick_Massarini
03-08-2011, 04:22 AM
Any size from 80 square inches up to 480 square inches with the longest side being no longer than 24 inches.
These were the Masters size allowances for the many years. This year, the PPA-PEC has lifted the 16x20 only size restrictions on Non-Masters, so that anyone can send in any size within the previous Masters size limits. The 24" limit is in place since that is the largest size that will fit inside the shipping carts that are used to transport the prints to and from the IPC and the exhibit at Imaging.

Erin_L._Clark
03-08-2011, 05:57 PM
Darnit Rick= I was really hoping for exact sizes- I saw that on the website- square inches means what by what?! :D

edited to add- found out. Thanks.

Stephanie_Millner
03-08-2011, 06:01 PM
20x24 I think?

Rick_Massarini
03-08-2011, 08:32 PM
Darnit Rick= I was really hoping for exact sizes- I saw that on the website- square inches means what by what?! :D

edited to add- found out. Thanks.

The minimum size would be 80 square inches - example - 8x10, 4x20, or any combination of height and width that would add up to 80 square inches

The maximum size would be 480 square inches - using the longest side eing 24", then the largest size print would be a 20x24. Any size smaller than 20x24 would be acceptable as long as it was larger than the minimum size.

Erin_L._Clark
03-10-2011, 07:40 PM
thanks Rick- that's good to know! :)